DYNAMO Floresan Serisii,

Şablonlama, yazma ve işaretleme işleriniz için kullanabileceğiniz, damlama yapmayan ve astar gerektirmeyen özel formülü, tek katta kapatma özelliği ile yüksek kalitede yeni nesil sprey boyalardan oluşur. İç ve dış mekan kullanımına uygundur. Mermer, alüminyum, metal, ahşap, plastik, kağıt, karton, cam, seramik, taş, beton ve yapay çiçek gibi birçok yüzeye uygulanabilir.  

FEATURES

• Practical use 
• Astarsız uygulama
• Superior adhesion
• Tek katta kapatma
• Damlamayan özel formül
• Şablonlama ve işaretlemeye uygun
• Maximum color stability
• Mild odor
• Quick-drying
• Olağanüstü neon görünüm
• Uzun süreli canlılık
• Suitable for indoor and outdoor use
• Resistant to harsh weather conditions, fading, and scratches
• Lead-free

AMBALAJ VE DOLUM

Easy-to-understand, color-coded 400 ml packaging

APPLICATION

• Make sure the surface is clean, dry, and free of grease.
• If there is old paint on the surface, lightly sand it off; if there is rust, remove it.
• Use masking tape to cover the areas you don’t want to paint.
• Wear gloves, safety goggles, and a mask.
• 25 cm. mesafeden, mümkün olduğunca parmak basıncını değiştirmeden uygulayın.
• Hold the can upright while spraying; otherwise, paint may leak from the nozzle.
• Apply two coats, waiting 8–10 minutes between coats.
• Efekt ve Metalik renklerin üzerine vernik kullanımı önerilmez!

KULLANIM TALİMATI

Shake the spray can for at least 3 minutes until you hear the mixing ball inside. Use outdoors or in a well-ventilated area. Before first use, spray into the air for 3–4 seconds and test on another surface. To reuse after application, turn the can upside down and press the actuator for 3–5 seconds to clean the valve.

The ideal temperature for application is 10–25°C, with a maximum humidity of 65%.

The recommended storage temperature range is 5–35°C.

Coverage: On average, one coat covers 2.5–3 m² of surface area.

Kuruma süresi (20°C ve Nem<65% için)

• Touch-dry in 5–15 minutes.
• Fully dry in 8–10 hours
• Chemical curing: 22–24 hours