PRODUCT DESCRIPTION
It is a water-based, acrylic copolymer resin based, silicone added, matt, decorative interior top coat wall paint.

FEATURES
Although it has a matt appearance, it can be wiped off thanks to its silicone additives. It has high coverage and whiteness and provides excellent adhesion to the recommended surfaces. It is very easy to apply since its spreading is extremely good. Allows the applied surfaces to breathe. Odorless and environmentally friendly.

APPLICATION
It can be easily applied on all kinds of plaster, exposed and gas concrete, betopan, gypsum board, old painted walls and ceilings, mdf, osb surfaces and paintable wallpapers after the recommended grounding and priming process. Application surfaces should be dry, clean and free of dust. Old and blistered painted surfaces should be scraped clean. If necessary, rough and loose surfaces should be puttyed with "Düfa Acrylic Interior Wall Putty" in order to smooth the surface. Following the correction process, it is recommended to use a single coat of "Ultra Acrylic Transparent Primer" or "Ultra Acrylic 1/7 Concentrated Primer" on absorbent surfaces such as putty, satin plaster applied or chalky in order to reduce topcoat paint consumption and increase the adhesion of the paint to the surface. Synthetic painted surfaces should be sanded and all dust should be removed. It is recommended to use a single coat of "Ultra Acrylic Covering Primer" as a conversion primer when changing from synthetic painted surface to water-based surface and color changes. "Classic Silicone Matte" is thinned by maximum 20% with water and applied in 2 coats with a roller or brush on primed surfaces. Waiting time between coats is 3-4 hours (may vary according to ambient temperature). Application temperature should be between 5˚C and 35˚C.

CORPORATION PERIOD

Touch drying: 30-40 minutes. Waiting between coats: 3-4 hours. Full drying 24 hours (23 °C and 50% humidity)

EXPENDITURE

Depending on the absorbency and type of the surface, 13-15 m² lt area can be painted in one coat. Field sample work should be done for exact consumption.

STORAGE
It should be stored in its sealed package in cool and dry places away from direct sunlight, between 5°-35° C and protected from frost.